计电器:控制切刀(不切电磁阀灯不亮更换,不停切更换)分离挂块:控制切刀、分类、误差(出现切刀卡卡卡响,长短不一更换)
编码器:控制计数(电脑板数字不走即坏了,长短不一更换)拨块:控制切刀(切不断更换)
开关:控制电源(电脑板不现实)滑块:控制分离(打滑、长短不一更换)
变压器:控制电压输出伏数梅花套:控制分离(打滑、长短不一更换)
交流接触器:控制前进、后退、运行电磁铁:控制切刀(不切、切刀无力、长短不一更换)
油泵:控制切刀压力(切不断更换)回旋栅:控制分离、回刀(打滑、切刀无力、卡卡响更换)。
电磁阀:控制切刀压力、回刀快慢、它会产生卡刀定刀块:控制切刀(出线卡刀、不顺、更换)
磁流阀:控制压力、排压。(切不断、不排压更换电机:控制运行(出线漏电、无力、更换)
顶刀弹簧:控制回刀、出线堵铁更换
编码轮(即计数轮):控制计数(长度不准、长短不一更换)
托轮:控制尺寸(长度不准、长短不一更换)切刀压力密码:266  压力8-25
编码轮轴、轴承:控制与编码轮并用(尺寸不准更换)修正长度密码:1234(995或1997)
调直轮:控制调直钢筋(调出来有弯头更换)回刀时间密码:15-22毫秒
电脑板:控制前进、后退、运行、误差、记忆、控制功能
备注:溢流阀不要随便调动。



Electrical appliances: control cutting knife (not cut solenoid valve lights do not change, do not stop to change)
Encoder control: counting (digital computer board does not go bad, the replacement of different lengths)
Switch: control power supply (computer board is not realistic)
Transformer: control voltage output.
AC contactor: control forward, backward, running
Oil pump: control cutting knife pressure (continuous replacement)
Solenoid valve: control the pressure of a cutter, cutting speed, it will produce a knife.
Magnetic flux valve: control pressure, pressure, (cut continuously, do not discharge pressure change)
Top knife spring: control back to the knife, line blocking iron replacement.
Encoding wheel (i.e. counting wheel): control (not counting the length, length of replacement).
Wheel size: control (no length, length change)
Encoding wheel axle, bearing: control and encoding wheel and use (size is not allowed to change)
Straight round: control of straightening steel (adjusted out of elbow replacement)
PC board: control forward, backward, running, error, memory, control functions.
Note: do not transfer the overflow valve.
The separation of the hanging block: control cutter, classification error (cutting knife, appear Kaka sound, different replacement)
To control the cutting knife (continuous replacement).
Slider control: separation (slip, length replacement)
Meihua: set control (separation skid, length of replacement)
Electromagnet: control the cutting knife (not cutting, cutter weakness, length change)
Swing gate: control the separation, back to the knife (skid, cut knife, Kaka ring replacement).
The fixed knife: knife (wire cutting, control flow, replacement)
Motor: control operation (outlet leakage, powerless, replacement)
PC board: control forward, backward, running, error, memory, control functions.

Cutter pressure password: 266 pressure 8-25
Fixed length code: 1234 (995 or 1997)
Return time password: 15-22


1、本机会伤人,使用时请远离本机

2、持电工证上岗,使用时详阅说明书,后果自负

1, the opportunity to hurt, use, please stay away from the machine
2, electrician certificate, when used to read the instructions, the consequences.


售后电话:020-34755345、13711034515、18022345808